About Us

CHILL ROLLS FOR ROLLING MILLS.

The rolls are double poured duplex rolls and are manufactured by the advance centrifugal process. Duplex rolls have the advantage of selecting the harder best performing material on the working surface, which is primarily a Cr-Ni-Mo alloyed chill cast iron & a relatively softer material inside. After casting the rolls are annealed to relieve the internal stresses thus improving the strength of the material. After heat treatment the rolls are proof machined & fitted with Steel shaft to close tolerance.

These rolls are manufactured for section mills producing rounds, squares, flats, Hexagon, Gate Channel as well as mills producing Tor steel and Tmt bars.

We also provide Single poured Chill Cast iron rolls for angle and Channels

CHILL ROLLS FOR NON METALLURGICAL PURPOSES

These rolls are manufactured for
@ Roller Flour Mills
@ Oil Mills
@ Paper Calendaring Machines
@ Solvent Extraction Plants
@ Rubber Mixing Mills
@ Crushing plants/ Sugar Plants
@ Paint plants
@ Cereal and Grain Processing
@ Chocolate refiners and Food Processing
@ Rice Flaking
@ Oil Seed Crushing and Flaking
@ Pellet Crumbling
@ Coffee Grinding
@ Biscuit and Confectionery Plants

The rolls are double poured duplex rolls and are manufactured by the advance centrifugal process. Duplex rolls have the advantage of selecting the harder best performing material on the working surface, which is primarily a clear carbon chilled cast iron or a Cr-Ni-Mo alloyed chill cast iron & a relatively softer material inside. After casting the rolls are annealed to relieve the internal stresses thus improving the strength of the material. After heat treatment the rolls are machined & fitted with spindles from both sides. Fluting is also done on the roll surface as per requirement of the customer.

FORGED ROLLS:

We manufacture forged rolls in the grades M.S., En8, En9, En19, En24, En31, En42, Etc as per customer's requirement. Rolls are manufactured up to a diameter of 24" (Max) & maximum Weight of 3 Tonnes.

Most of the rolls being used as roughing rolls for rolling mills and for rolling heavy sections

ROLLING MILL MACHINERY:

We provide complete rolling mill machinery as per customer's requirement on turnkey basis.

With an experience of over 2 decades we have witnessed the infinite changes in the industry and can recommend and provide the best possible solution for any problem faced during the erection and the production process.

We also provide Spares for rolling mills including
@ Fibre Bearing
@ Gears
@ Gearbox, Reduction gear box
@ Gear Coupling
@ Universal coupling
@ Stands
@ Bearing Chokes
@ Shearing Machines
@ CI Coupling, CI Rail, etc

GEAR COUPLING & GEARS

Gear Couplings are used to couple two shafts.
Advantage of gear coupling over rigid flange coupling being that
@ A slight misalignment is permissible between the two shafts.
@ Considerable reduction in the jerks as compared to those, which exists

Member Information

Date Joined:

2009-05-30 19:01:00